PLUS 1D is a Bar Nesting optimization software, which helps reduce the waste in cutting any 1D (linear) material like pipe, bar, sections, flanges, angles, beams, tubes, channels, frames, extrusions etc. It automatically generates the optimum cutting plans once the part list, and the available stock has been entered. It has a simple user interface and you get the optimized result, with detailed reports at the click of a button.

• License: Commercial
• Language: English, Spanish
• Release: 2008-05-16
• Size: 13 Mb
• Cost: 220.00 $

Astra R-Nesting software is used for automatic nesting of sheet materials. Astra R-Nesting software provides entry and storage of information about orders and materials, automatic and interactive nesting, calculation, saving and registration of rests, printing nesting plans and specifications, estimation of cost of works carried out.

• License: Shareware
• Language: English
• Release: 2006-01-16
• Size: 1 Mb
• Cost: 90.00 $

Defines how to cut rectangular pieces from glass, metal, drywall or veneer sheets with minimal waste of material. GNCutter uses two types of cutting methods: Nesting and Guillotine. Guillotine is only method you can use for glass or ceramic cutting. In other cases you can use both methods, though nesting usually produces better results. Instantly generates and displays complex layouts and cutting instructions right at your worksite.

• License: Shareware
• Language: English
• Release: 2006-06-11
• Size: 349 Kb
• Cost: 97.00 $

Bar Cut Optimizer and Manager is a length nesting optimizer and stock manager software. It minimizes the waste materials in the cutting process of any linear material like pipes, bars, tubes, profiles, paper rolls, extrusions, beams, cables etc. Key benefits: money saving by reducing waste, time saving (let the program find the optimum solution), stock management, easy to use and easy to understand.

• License: Freeware
• Language: English
• Release: 2005-02-07
• Size: 501 Kb
• Cost: Free

1DNest is the most efficient, friendly and powerful optimizer for cutting of materials provided in standard lengths, like bars, tubes, metallic profiles, extrusions, paper rolls, etc.

• License: Shareware
• Language: English, French, German, Spanish
• Release: 2005-02-24
• Size: 816 Kb
• Cost: 150.00 $

CutMaster 2D is a professional rectangular nesting software package. It enables you to maximize the use of material by generating the most optimized cutting layouts. It uses advanced algorithms, specially designed to optimize the cutting layouts in the panel metal, furniture, glass and similar industries.

• License: Shareware
• Language: English, French, German, Italian, Other
• Release: 2004-02-04
• Size: 2 Mb
• Cost: 125.00 $

Sort a group of selected cells in MS Excel using different methods. Features include: A-Z Sort Selected Cells Starting at Second Character Position, Starting at Third Character Position, Starting at x Character Position, Starting at Second Word, Starting at Third Word, Starting at x Word, Starting After User-specified Characters, By Alphabet Characters, By Numeric Characters, By Alphanumeric Characters, By Non-alphanumeric Characters, Backwards

• License: Shareware
• Language: English
• Release: 2006-09-05
• Size: 450 Kb
• Cost: 19.82 $

A simple program for calculatiing and printing musical instrument fret positions.

• License: Freeware
• Language: English
• Release: 2005-12-19
• Size: 493 Kb
• Cost: Free

Twin Files identifies files that are empty, trash, or duplicate other files on your disk. Because these files may be unnecessary, Twin Files lists them, and lets you take appropriate action on those files you specify to free up disk space. It is a good idea to run Twin Files before you install applications, compare files downloaded from the Internet and before you optimize a drive.

• License: Shareware
• Language: English
• Release: 2006-08-06
• Size: 871 Kb
• Cost: 19.00 $

The program is intended for creation and optimization of cutting tickets of sheet materials. In the program fast input of the information on orders and materials is provided; automatic and manual formation of cutting tickets; the automatic account of all parameters of cut; print of cutting tickets and specifications

• License: Shareware
• Language: English, Russian
• Release: 2006-04-25
• Size: 3 Mb
• Cost: 100.00 $

Although many things such as emotion and thought may be difficult to measure, some things are much easier to quantitize. Measurement Converter aids in converting one measurement to another similar measurement. Why people care so much about measurements and coversions still remain a mystery to one such as myself. I am convinced however that there could be a useful purpose for it.

• License: Shareware
• Language: English
• Release: 2007-02-17
• Size: 955 Kb
• Cost: 9.87 $

Glass Cutting Suite is CAD/CAM nesting software for sheet layout, cutting glass, sheet metal layout, cutting optimization.

• License: Shareware
• Language: English
• Release: 2004-04-29
• Size: 0 B
• Cost: 185.00 $

Cutting optimize software - easy and quick ! Optimik allowes you to automatically make the optimal cutting plans for panel/sheet materials in following manufacturing areas : furniture, metal working, glass cutting, textile cutting, etc. Optimik will do this automatically, saving your time and money.

• License: Freeware
• Language: English, Czech, French, German, Greek, Hungarian, Italian, Other, Polish, Portuguese, Romanian, Spanish
• Release: 2006-03-28
• Size: 2 Mb
• Cost: Free

Reduce the actual size of PDF files by compressing text and graphics. Compressed PDF files can be opened and viewed normally by Adobe Acrobat Reader all versions.

• License: Freeware
• Language: English
• Release: 2004-05-18
• Size: 913 Kb
• Cost: Free

Open, validate,dedup,split horizontally and vertically,join, remove columns, reformat, check individual fields, update field values (manually or automatically) of any text file (fixed or delimited). Modify all your marketing, data, mailing,customer or voters lists. Check firewall, web, telecom exchange logs, or any other text file up to 300 GB or 30 million records. Do not split your files to fit into another application - JUST USE THEM.

• License: Commercial
• Language: English
• Release: 2008-03-19
• Size: 5 Mb
• Cost: 69.00 $

Optimumcut-1D is a Stand-Alone (1 Dimension) Cutting List Generator and Linear Material Optimization Software Tool which calculates and displays exactly how to obtain the best yield from stock lengths of profile. Subsequently leading to significant savings in materials cost when estimating and ordering materials for Manufacture and Production. Obtain The Maximum From A Minimum

• License: Shareware
• Language: English, French, German, Spanish
• Release: 2005-05-25
• Size: 2 Kb
• Cost: 180.00 $

With PatterDiffer you´ve got the possibility to find equal data sequences in two different files. You can see the result in a tabular display with textual and hexadecimal view. The result can be exported to a XML-File for further automated processes. Since the data is analysed on a binary level its structure is not important for the analysis. Simplified you can say that PatternDiffer analyses of the largest connected sequences of two file.

• License: Shareware
• Language: English, German
• Release: 2006-04-17
• Size: 12 Mb
• Cost: 59.00 $

Cutting Optimizer, 1D nesting software for optimization, maximize stock cutting utilization and minimize material waste and cost.

• License: Shareware
• Language: English
• Release: 0000-00-00
• Size: 0 B
• Cost: 185.00 $

Arkan is designed to convert border of a raster mask (selection of an object in scene) or any closed polyline into B-spline (piecewise cubic Bezier curve) representation spread widely in vector graphics packages. Arkan chooses the best position both for node points (junctions of adjacent Bezier polynomial pieces) and for control points, which don’t lie on the curve but only affects its shape.

• License: Freeware
• Language: English
• Release: 2005-04-06
• Size: 1 Mb
• Cost: Free

InnerSoft CAD is a add-on for AutoCAD. This group of tools will allows you to: Export to a Excel Sheet the values of Area/Length property or coordinates for various AutoCAD entities. Import from a Excel Sheet the vertex coordinates for a set of 2D polylines or 3D polylines (you can choose between 3 different methods). You can also import a set of points from Excel or a set of Texts with a insertion point for every one.

• License: Demo
• Language: English
• Release: 2006-05-09
• Size: 430 Kb
• Cost: 100.00 $